Gates 8MGT3 PowerGrip® GT®3
| Belt Numbers | Pitch Length | Tooth Count |
| 384-8MGT | 384 mm [15.12"] | 48 teeth |
| 480-8MGT | 480 mm [18.9"] | 60 teeth |
| 560-8MGT | 560 mm [22.05"] | 70 teeth |
| 600-8MGT | 600 mm [23.62"] | 75 teeth |
| 640-8MGT | 640 mm [25.2"] | 80 teeth |
| 720-8MGT | 720 mm [28.35"] | 90 teeth |
| 800-8MGT | 800 mm [31.5"] | 100 teeth |
| 840-8MGT | 840 mm [33.07"] | 105 teeth |
| 880-8MGT | 880 mm [34.65"] | 110 teeth |
| 920-8MGT | 920 mm [36.22''] | 115 teeth |
| 960-8MGT | 960 mm [37.8"] | 120 teeth |
| 1040-8MGT | 1040 mm [40.95"] | 130 teeth |
| 1120-8MGT | 1120 mm [44.1"] | 140 teeth |
| 1160-8MGT | 1160 mm [45.66"] | 145 teeth |
| 1200-8MGT | 1200 mm [47.25''] | 150 teeth |
| 1800-8MGT | 1800 mm [70.87"] | 225 teeth |
PowerGrip® GT®3 belts are made of a highly advanced combination of materials designed to reduce both initial and operating costs. The entire PowerGrip® GT®3 belt range is suited both for new drive designs as for performance upgrades on existing drives. It has two times the rating of competitive RPP® belts and its predecessors PowerGrip® GT® and HTD®, with the largest selection of belts and sprockets in the industry. The 8MGT pitches are the optimum choice for high performance drives in the machine tool, paper and textile industries where durability and low maintenance are required or to upgrade existing HTD® belt drive applications. At reduced widths, GT®3 belts can be used as a direct replacement for most 8mm pitch standard rubber RPP® and HTD® synchronous belts.
Scroll down for further information
↓
